Description
Crystal Go Carpet Cleaning Pre Treatment Spray
Cleaning instructions for a professional finish to your carpets
Stage One — Vacuum — Apply Spray and Brush
Four easy steps to remove heavy soil and ingrained dirt…
Step 1. Start by thoroughly vacuuming to remove loose dirt and lift the carpet pile ready for cleaning. For best results, use an upright vacuum cleaner.
Step 2. Apply a light, even spray to heavily soiled areas and stubborn stains, using approximately 3–4 pumps per square metre (3 ft x 3 ft).
Step 3. Allow the carpet pre-spray to dwell for 3–4 minutes to penetrate the fibres, especially in areas where the carpet is matted with ingrained dirt.
Step 4. Gently agitate the area using a soft to medium brush, working in both north-to-south and east-to-west directions to help lift and loosen trodden-in dirt and grime. For best results, we recommend using our Magic Roller Carpet Cleaning Brush 
Magic Roller Carpet Cleaning & Spot Cleaning Brush
Stage Two — Apply Dry Carpet Cleaner — Brush and Vacuum
Final three steps to professionally clean carpet…
Step 5. Apply one handful of dry carpet cleaner to a small section of carpet—no more than one square metre (one square yard) at a time. For best results, we recommend our eco dry carpet cleaner powder 👉 eco dry carpet cleaner 1kg bag formulated with eco-friendly cleaning agents to absorb dirt and grime.
Step 6. Gently brush the area using a soft to medium brush, working in both north-to-south and east-to-west directions to evenly distribute the dry carpet cleaning powder through the carpet pile.
Step 7. Vacuum thoroughly to remove soil-laden particles of dry carpet cleaner, lifting away dirt and leaving your carpet fresh, clean, and dry.
If an area requires more cleaning, repeat steps.
For stubborn spots and spills try our Professional Spot & Stain Remover Professional Carpet Spot & Stain Remover
Our full range of carpet and upholstery cleaning products can be found in our website store.
